Rockwell Automation Publication 1791ES-UM001G-EN-P - November 2016 79
Configure the I/O Modules Chapter 5
Configure the Module
Properties
Follow these steps to configure the general properties of the module.
1. From the I/O configuration tree, double-click the module, such as the
1791ES-IB8XOBV4 module, to see the Module Properties dialog box.
2. Type a unique name for the module.
3. If desired, type a description.
Note the safety network number (SNN). In most cases, you can use the default
that is provided by the programming software. For a detailed explanation of the
safety network number (SNN), see the GuardLogix® Controller Systems Safety
Reference Manual that is listed in the Additional Resources on page 10
.
To Next Page
Loading...
