Allen-Bradley 1794ASB Series B User Manual

Chapter 2
Publication 17946.5.3
Installing Your Remote I/O
Adapter Module
This chapter describes the procedures for installing your remote I/O
adapter module. These include:
• power requirements
• mounting the remote I/O adapter
• setting the module switches
If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and
tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards,
in whole or in part, documented in a technical construction file:
• EN 50081-2EMC – Generic Emission Standard, Part 2 –
Industrial Environment
• EN 50082-2EMC – Generic Immunity Standard, Part 2 –
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
• Industrial Automation Wiring and Grounding Guidelines For
Noise Immunity, publication 1770-4.1
• Guidelines for Handling Lithium Batteries, publication AG-5.4
• Automation Systems Catalog, publication B111
Chapter Objectives
European Union Directive
Compliance

Allen-Bradley 1794ASB Series B Specifications

General

Brand	Allen-Bradley
Model	1794ASB Series B
Category	Adapter
Language	English