Publication 1756-UM001G-EN-P - January 2007
Develop Motion Applications 107
2. Click the Tune tab.
3. In the Travel Limit box, type the number of revolutions to which
you want to limit your axis during its tuning.
4. In the Speed box, type the number of revolutions per second to
which you want to limit your axis during its tuning.
5. Click Start Tuning.
6. Click OK.
Additional Resources
For additional information, consult the Logix5000 Motion Module User
Manual, publication 1756-UM006.
To Next Page
Loading...
