Publication 1756-UM001G-EN-P - January 2007
Develop Motion Applications 93
Add SERCOS Interface
Drives
With the addition of SERCOS interface modules to a controller’s I/O
configuration, you can use RSLogix 5000 programming software to set
up the modules.
To add SERCOS interface modules, perform this procedure.
1. In the I/O configuration tree in RSLogix 5000 programming
software, right-click the SERCOS network and select New
Module.
The Select Module dialog appears.
2. Double-click Other.
3. Select your drive.
Choose from these SERCOS interface drives:
• 1394
• Kinetix 6000
• Ultra3000
• 8720MC
4. Click OK.
To Next Page
Loading...
