Publication 1756-UM001G-EN-P - January 2007
Maintain Nonvolatile Memory 121
Use a CompactFlash
Reader
If the revision of the project or projects on your CompactFlash card
are ≥ 12, then the card is formatted using the FAT16 file system.
You do not have to manage the files on a CompactFlash card. The
card automatically loads the project that you most recently stored. For
additional flexibility, the file system also lets you:
• manually change which project loads from the CompactFlash
card.
• manually change the load parameters for a project.
A sample controller project that reads and writes a CompactFlash card
is available with RSLogix 5000 Enterprise programming software. See
the section Sample Controller Projects on pg. 71.
Additional Resources
For additional information, consult the Logix5000 Controllers
Common Procedures Programming Manual, 1756-PM001
To Next Page
Loading...
