Publication 1756-UM001G-EN-P - January 2007
108 Develop Motion Applications
Obtain Axis Information
You can obtain axis information through any one of several methods.
To obtain axis information, take any one, or all, of these steps.
Obtaining Axis Information
Use the Axis Properties dialog window to configure the axis.
Use a Get System Value (GSV) instruction or Set System Value (SSV)
instruction to read or change the configuration at run-time.
Use the tag of the axis for status and faults.
Use the Quick View pane to see the state
and faults of an axis.
To Next Page
Loading...
