EasyManuals Logo

Allen-Bradley PowerFlex 755 Reference Manual

Allen-Bradley PowerFlex 755
497 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #485 background imageLoading...
Page #485 background image
Module Configuration Attributes
Chapter 5
Rockwell Automation Publication MOTION-RM003I-EN-P - February 2018 485
Bus Regulator Thermal Overload User Limit
Usage Access T Data Type Default Min Max Semantics of Values
Optional - BD Set
REAL 100 0
% Regulator Rated
This attribute sets the user limit for the Bus Regulator Thermal UL exception.
Bus Overvoltage User Limit
Usage Access T Data Type Default Min Max Semantics of Values
Optional - BD Set
REAL 140 0
% Nominal Bus Voltage
This attribute sets the user limit for the Bus Overvoltage UL exception. Unlike the
corresponding Factory Limit, which is specified in Volts, the User Limit is based
on the percentage of Nominal Bus Voltage during operation.
Bus Undervoltage User Limit
Usage Access T Data Type Default Min Max Semantics of Values
Optional - All Set
REAL 0 0 100 % Nominal Bus Voltage
This attribute sets the user limit for the Bus Undervoltage UL exception. Unlike
the corresponding Factory Limit, which is specified in Volts, the User Limit is
based on the percentage of Nominal Bus Voltage during operation
Control Module Overtemperature User Limit
Usage Access T Data Type Default Min Max Semantics of Values
Optional - All Set
REAL 0 0
Degrees Celsius (°C)
This attribute sets the user limit for the Control Module Overtemperature UL
exception.
Converter Pre-Charge Overload User Limit
Usage Access T Data Type Default Min Max Semantics of Values
Optional - BD Set
REAL 100 0
% Converter Rated

Table of Contents

Other manuals for Allen-Bradley PowerFlex 755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley PowerFlex 755 and is the answer not in the manual?

Allen-Bradley PowerFlex 755 Specifications

General IconGeneral
CategoryAC Drive
Amperage2.2…1470 A
Output Voltage0 to Input Voltage
Output Current2.2…1470 A
EnclosureIP20, IP30, IP54
CommunicationsEtherNet/IP, ControlNet, DeviceNet
I/ODigital, Analog, Encoder, Relay
SafetySafe Speed Monitor
Protection FeaturesOvercurrent, Overvoltage, Undervoltage, Overload, Short Circuit, Ground Fault, Overtemperature
Operating Temperature-10°C to 50°C (14°F to 122°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Humidity5…95% noncondensing
AltitudeUp to 1000m (3300ft) without derating
Voltage200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Input Voltage200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Control MethodSensorless Vector

Related product manuals