108 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 9 Updating the Device
5. Use this optional step only if you want to change the file name, but it is not
recommended.
Click Browse Flash. The Browse Flash dialog appears with the file name
populated automatically. If the file name does not populate automatically,
enter it manually in the File Name field, and then click OK.
6. Click Upload Image. ASDM uploads the file.
Table 13 - Upgrade Software Configuration Fields
7. The ASA dialog indicates that the image was uploaded and asks if you
want the image set as the restart image. Click Yes to make this the
ASA image.
8. At the Information dialog prompt, click OK.
9. Click Close in the Upload Image from Local personal computer dialog.
10. Reload the device:
Field Description
Image to Upload • ASA - Adaptive Security Appliance
• ASDM - Cisco Device Management software for ASA platform
Local File Path The path to the location of the file on your local personal computer.
Flash File System Path The path to the location on device flash.
To Next Page
Loading...