122 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 10 Troubleshoot
Install the SFR 5.4.1.2 Update
Follow these steps to install the SFR 5.4.1.2 update. Only do perform this
update if you are running the 5.4 branch and you do not want to run 6.4.
However, we recommended you update to 6.4.
1. Log in to ASDM, by going to:
https://ASA_IP_ADDRESS/admin/public/index.html
2. Select Run ASDM.
3. Log in with the ASA enable password that you set earlier.
4. ASDM > Configuration > ASA FirePOWER Configuration > Updates
-> Upload Update.
5. Select Cisco_Network_Sensor_Patch-5.4.1.2-23.sh.
6. After the file uploads, install the update.
7. Wait 2 hours.
8. Exit ASDM.
To Next Page
Loading...