42 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 3 Configure the Security Appliance
3. Provide password information.
4. On the Management IP address Configuration dialog box (Step 2of 13).
a. Inline Mode Only:
Enter the IP address and Subnet Mask from the range of the network
you want to monitor.
b. SPAN Port Mode Only:
Enter a temporary/dummy IP address that is not in the management
network.
The Subnet Mask must be changed to something other than
255.255.255.255. For example, IP Address = 2.2.2.2, Subnet Mask =
255.255.255.0
IMPORTANT This address is NOT the Management IP addresses in the
Management network.
Stratix 5950 ASDM 7.6(2) for ASA - 169.226.0.2 - Startup Wizard
Stratix 5950 ASDM 7.6(2) for ASA - 169.226.0.2 - Startup Wizard
10.51.72.223
255.255.252.0
To Next Page
Loading...