Rockwell Automation Publication 1783-UM010C-EN-P - June 2019 59
Configure the Security Appliance Chapter 3
19. Enter a description.
20. Click OK.
21. In the Network Analysis and Intrusion Policies dialog box, change the
Default Network Analysis Policy to the Network Analysis Policy that
you created.
22. Close the popup window that shows the new Network Analysis Policy
that you created.
23. Click OK.
IMPORTANT EVERY time that you create a new Access Control Policy, this step MUST be
done.
TIP Create the CIP Network Analysis Policy only once. If you create an
Access Control Policy, you can use the existing CIP Network Analysis Policy.
To Next Page
Loading...