Rockwell Automation Publication 1783-UM010C-EN-P - June 2019 63
Configure the Security Appliance Chapter 3
12. Go to:
ASDM>Monitoring>ASA FirePOWER Monitoring>Task Status.
13. Wait until the Apply Block_CIP_Admin_Policy task finishes, which
takes about 2 minutes.
TIP The device ships in a Monitor Mode configuration. This configuration
enables the device to show you what it would have blocked, if it was in a full
blocking configuration, for test purposes. This test configuration only shows
the first traffic that it would have blocked per TCP connection.
To Next Page
Loading...