66 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 3 Configure the Security Appliance
3. On the Edit Service Policy Rule page, go to:
Rule Actions>ASA FirePOWER Inspection.
4. Change the options to Close traffic and clear Enable Monitor Only.
5. Click OK on the Edit Service Policy Rule.
6. Go to ASDM>Save ASA Changes.
7. Click Apply Changes.
8. Physically connect the 5950 device inline by connecting the network
cables to port 1 and port 2 of the device.
A test configuration could be:
a. PC>Network Cable>Stratix 5950 Port 1
b. Stratix 5950 Port 2>Network Cable>1756-EN2TR
To Next Page
Loading...