Allen-Bradley Studio 5000 Logix Emulate User Manual

Communicate with PanelView Terminals
Chapter 7
Rockwell Automation Publication CNET-UM001F-EN-P - February 2018 99
6. From the Select Module dialog box, select the PanelView terminal and
click OK.
7. From the Module Properties dialog box, configure the terminal.
For information on configuring local ControlNet communication
modules, refer to Configure a ControlNet Module on page 29 on
page
31.

Allen-Bradley Studio 5000 Logix Emulate Specifications

General

Brand	Allen-Bradley
Model	Studio 5000 Logix Emulate
Category	Controller
Language	English