Network Adapter Card Installation Guide
145
WINS Displays the IP address of the Windows
Internet Name Service, used in name
resolution by converting NetBIOS names
into IP addresses.
DNS Displays the IP address of the domain
name server.
Hardware
Hardware Status Displays a text readable form of the user
code returned by the Microsoft Windows
operating system.
IRQ Displays the interrupt level assigned to
the network adapter card.
I/O Range Specifies the input/output address range
used by the system to access the
registers on the network adapter card.
Memory Range Specifies the range of shared memory
allocated for use by the network adapter
card.
Network Connections
button
Launches the Network Connections
window. This window is used to set the IP
address, subnet mask and default
gateway of the network adapter card. For
further information, refer to “Configuring
the IP Address, Subnet Mask, and
Gateway Address” on page 92.
The Network Connections window is also
used together with the AT-MUX protocol
to add and delete VIDs for adapters that
handle tagged traffic from multiple VLANs.
For information, refer to Chapter 9,
“AT-MUX Multiple VLAN Protocol” on
page 157.
Table 12. General Tab (Continued)
Field Description
To Next Page
Loading...
Need help?
General
