Page 8
Allied Telesis AT-8000SSwitch
Switch Installation Guide
Chapter 1. Product Description
The new AT-8000S series combines the best of the previous L2 series; stackability and affordability.
The new AT-8000S series is an entry level managed switch for the SMB, Small Office/Field Office offering
managed desktop connectivity. The fiber uplink provides connectivity between workgroups over a larger
distances. In addition the AT-8000S series is also equipped with a copper 10/100/1000Base-T port for
connectivity to gigabit aggregation switches.
The new AT-8000S series combines value with the necessary management features for networked applications.
There are five device models which provide different hardware configurations and include the following:
• AT-8000S/16 device which supports 16 built-in 10/100Base-T ports, and a Combo port functionality that
supports both copper and SFP interfaces.
• AT-8000S/24 device with stacking ports which supports 24 built-in 10/100Base-T ports, two Gigabit stackable
and 2 Combo Ports, inclusive of a Combo port functionality that supports both copper and SFP interface.
• AT-8000S/24POE device with stacking port which supports 24 built-in 10/100Base-T ports, two Gigabit
stackable and 2 Combo Ports, inclusive of a Combo port that supports both copper and SFP interface. The
PoE function is supported on RJ-45 ports.
• AT-8000S/48 device with stacking ports which supports 48 built-in 10/100Base-T ports, two Gigabit stackable
and 2 Combo Ports, inclusive of a Combo port functionality that supports both copper and SFP interface.
• AT-8000S/48POE device with stacking port which supports 48 built-in 10/100Base-T ports, two Gigabit
stackable and 2 Combo Ports, inclusive of a Combo port that supports both copper and SFP interface. The
PoE function is supported on RJ-45 ports.
The AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/48POE can be joined together into a stack of
up to six units. For more information, see Chapter 3 Stacking.
Device configuration is performed through an Embedded Web Server (EWS) or through a Command Line
Interface (CLI). The device management is performed through a DB-9 RS-232 interface.
To Next Page
Loading...
