Installation
38
Unpacking the Media Converter
To unpack the media converter:
1. Remove all components from the shipping package and store the
packaging material in a safe location.
Allied Telesis recommends that you store the packaging in case you
need to return the unit for service.
2. Place the media converter on a level, secure surface.
3. In addition to the media converter, verify that the shipping container
includes the following accessories as shown in Table 7.
Table 7. AT-MMC6000 Series Accessory Kit
Description Illustration
One power
adapter
Rubber Feet
To Next Page
Loading...
Need help?
General
