49
C613-50104-01 REV A Command Reference for x230 Series 1712
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RMON Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Remote Monitoring (RMON).
For an introduction to RMON and an RMON configuration example, see the RMON
Feature Overview and Configuration Guide.
RMON is disabled by default in AlliedWare Plus™. No RMON alarms or events are
configured.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“rmon alarm” on page 1713
•“rmon collection history” on page 1715
•“rmon collection stats” on page 1716
•“rmon event” on page 1717
•“show rmon alarm” on page 1718
•“show rmon event” on page 1719
•“show rmon history” on page 1721
•“show rmon statistics” on page 1723
To Next Page
Loading...
