C613-50104-01 REV A Command Reference for x230 Series 836
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
MULTICAST COMMANDS
SHOW
IP RPF
show ip rpf
Overview Use this command to display Reverse Path Forwarding (RPF) information for the
specified IPv4 source address.
Syntax
show ip rpf <source-addr>
Mode User Exec and Privileged Exec
Example
awplus# show ip rpf 10.10.10.50
Parameter Description
<ipv4-source- addr> Source IPv4 address, in dotted decimal notation in the
format A.B.C.D.
To Next Page
Loading...
