Allied Telesis AT-x230-28GP - Class-Map

C613-50104-01 REV A Command Reference for x230 Series 932
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
CLASS
-MAP
class-map
Overview Use this command to create a class-map.
Use the no variant of this command to delete the named class-map.
Syntax
class-map <name>
no class-map <name>
Mode Global Configuration
Example This example creates a class-map called cmap1, use the commands:
awplus# configure terminal
awplus(config)# class-map cmap1
awplus(config-cmap)#
Parameter Description
<name> Name of the class-map to be created.