C613-50104-01 REV A Command Reference for x230 Series 711
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIP COMMANDS
IP
RIP SEND VERSION
In the following example, the VLAN interface vlan4 is configured to send both RIP
version 2 and 1 packets.
awplus# configure terminal
awplus(config)# interface vlan4
awplus(config-if)# ip rip send version 2 1
In the following example, the VLAN interface vlan4 is configured to send RIP
version 1 packets only.
awplus# configure terminal
awplus(config)# interface vlan4
awplus(config-if)# ip rip send version 1
In the following example, the VLAN interface vlan4 is configured to send RIP
version 2 packets only.
awplus# configure terminal
awplus(config)# interface vlan4
awplus(config-if)# ip rip send version 2
In the following example, the VLAN interface vlan3 is configured to use the RIP
version specified by the version (RIP) command.
awplus# configure terminal
awplus(config)# interface vlan3
awplus(config-if)# no ip rip send version
Related
Commands
ip rip send version 1-compatible
version (RIP)
To Next Page
Loading...
