The WAN disconnection schedule will be activated by checking this option.
In some areas, there is a time limitation for WAN connection service. For
example: the optical fiber service will be disconnected from 0:00 am to
6:00 am. Although there is a standby system in the device, at the moment
of WAN disconnection, all the external connections that go through this
WAN will be disconnected too. Only after the disconnected lines are
reconnected can they go through the standby system to connect with the
Internet. Therefore, to avoid a huge number of disconnection, users can
activate this function to arrange new connections to be made through
another WAN to the Internet. In this way, the effect of any disconnection
can be minimized.
Input how long the WAN service may be disconnected before the newly
added connections should go through another WAN to connect with the
Internet.
Select another WAN port as link backup when port binding is configured.
Users should select the port that employs the same ISP.
After the changes are completed, click “Apply” to save the configuration, or click “Cancel" to leave without
making any changes.
To Next Page
Loading...
Need help?
General
