Alpha 6000S series - Page 91

Chapter 4 Parameter Index
90
PF: Parameter protection and product identification information
Function
code
Parameter name
LCD display
Setting range
Factory
setting
Modify
MODBUS
address
PF.00 User password User password
0: No password
Other: Password protection
0 ○ 1000
PF.01
Parameter
write
protection
Parameter
protection
selection
0: All parameters are allowed to be
rewritten
1: Except for setting frequency
(P0.02), and the function code,
the other function codes are
prohibited to be rewritten
2: Except for this function code, all
others are prohibited to be
rewritten
0 ○ 1001
PF.02
Parameter
Initialization
Parameter
Initialization
0: No operation
1: Clear the fault history
2: Restore factory setting
(Except record \ password \
motor parameters)
3: Restore factory setting
(Except record \ password)
0 × 1002
PF.03 Parameter copy Parameter copy
0: No action
1: Parameter download
2: Parameter upload
3: Without download of motor
parameters
Note: Only active for LCD keypad
0 × 1003
PF.04 Reserve Reserve - 0 × 1004
PF.05 Product No. 1 Product No. 1 0~9999 * 1005
PF.06 Product No. 2 Product No. 2 0~9999 * 1006
PF.07 Product No. 3 Product No. 3 0~9999 * 1007
PF.08 Product No. 4 Product No. 4 0~9999 * 1008
PF.09
Product serial
number
Product serial
number
0~9999 * 1009
PF.10
Software
version number
Software
version number
0.00~99.99 * 100A
PF.11
Non-standard
version and
serial number
Non-standard
version and
serial number
0.000~9.999 * 100B
PF.12
Software
identification
code
Software
identification
code
0~9999 * 100C