Starting process includes the start of inverter power on, power recover, external fault reset, and restart after
Speed tracking function only with encoder (PG) or with speed tracking card.
P1.01 Start frequency Setting range: 0.10~60.00Hz [0.50Hz]
P1.02 Start frequency holding time Setting range: 0.0~10.0s [0.0s]
Notes:
Start frequency is the initial frequency at which the inverter starts, see f
S
as shown in Figure. 5-1-3 ; Holding time of
starting frequency is the time during which the inverter operates at the starting frequency, see t
1
as shown in Figure.
5-1-3:
To Next Page
Loading...
