17
SATELLITE SETTINGS MENU:
You can fix the Diseq-C and LNB types suitable for the satellites and TP frequencies in the region you provide
services in this menu. With this will the settings be used you have performed in all menus and you will be able to
set faster. (Please always control the correctness of your settings since some menus are using these settings.)
Beside this, you can delete ALL TPs of the satellites and perform a CHANNEL SCAN for these satellites in this
menu.
DVB-S/S2 SETTINGS:
You can perform the valid changes in the DVB S/S2 menus through the SETTINGS MENU. You can change active
reagion fort he Satellite list.
INDICATOR: Shows the power level indicators in dBm, dBuV and dBmV.
LEVEL SETTING: You can calibrate it when you think that the signal measurement indicator is low or high.
AUTO CONVERSION: You can select in the Automatic Satellite and Port Recognition menus the number of the
satellites you want to be controlled.
MEMORY INFORMATION: You can check how much memory is used in the satellite section.
To Next Page
Loading...
Need help?
General
