2. Tap the MODE (Bluetooth) button. It will turn blue and begin to flash to indicate that
your speaker is in Bluetooth pairing mode.
3. Go to your phone’s Bluetooth setting menu. Make sure that Bluetooth is turned on,
and then select “Versa speaker” from the list of available devices in order to pair.
4. Once your speaker and phone have been paired successfully, the MODE
(Bluetooth) button will stop flashing and remain blue.
NOTE: To switch from Bluetooth mode to Wi-Fi Mode – short press the Bluetooth button
and then press it again for 3 seconds.
The speaker can be in either Bluetooth mode or in Wi-Fi mode, they cannot be
enabled simultaneously.
8 / WI-FI CONNECTION
Please see “Altec Lansing VersA™ Bridge” for details about connecting your speaker
to your mobile device via Wi-Fi.
NOTE: To switch from Wi-Fi mode to Bluetooth mode – short press the Bluetooth button.
The speaker can be in either Bluetooth mode or in Wi-Fi mode, they cannot be
enabled simultaneously.
9 / TROUBLESHOOTING: SYSTEM RESTART
10
To Next Page
Loading...
