6. INSTALL THE ALTEC LANSING VERSA™ BRIDGE APP:
The next step is to install the Altec Lansing VersA™ Bridge app which is required to
set up your speaker to use Amazon Alexa.
Tap the “Install Altec Lansing VersA™ Bridge” button and follow the instructions
below:
(1) The Altec Lansing VersA™ Bridge app initial setup opens the app page in the
online Play Store/Apple App Store.
(2) Tap “Install” to install the application.
(3) After the installation is complete, tap “Open” to launch the Altec Lansing
VersA™ Bridge app.
(4) Follow the instructions to setup Wi-Fi and to sign in to your Amazon account. If
you do not have an account please follow the prompts to create a new one.
(5) After successful installation, please return to the Altec Lansing VersA™
Navigator app.
NOTE: If you tap “Skip”, you can install the Altec Lansing VersA™ Bridge app at
any time from the Navigator’s Home screen.
7. INSTALL THE AMAZON ALEXA APP:
The next step is to install the Amazon Alexa app which enables skills to be used on
your VersA speaker.
Tap the “Install Amazon Alexa” button and follow the instructions below:
(1) The Amazon Alexa app initial setup opens the app page in the online Play
Store/Apple App Store.
(2) Tap “Install” to install the application.
(3) Follow the instructions to setup the application.
14
To Next Page
Loading...
