Amazone Amatron+ - AMATRON+ Hierarchy and Options

Product description
16 Amatron+ BAG0082.2 10.10
4.5 Hierarchy of the AMATRON
+
Main menu
Operational menu
Job menu Calibrate machine menu
Entry:
 Name
 Note
 Selection
(kg/ha or K/m2)
 Seed type
 Start/continue
job
 Daily data
Delete hectare
Delete hours
Display:
 Job number
 Name of job
 Note
 Specified quantity
 Seed type
 Calibrated gearbox
position
 Area already
worked
 Hours (h) already
worked
 Average hours/ha
 Sowing rate (kg)
 Trip data
area/hours/quantity
Entry
Seed drills with gearbox:
 Required sowing rate
(kg/ha or K/m2)
 Gearbox position for calibration
test
 Seed quantity (kg)
collected from the calibration test.
Entry
Seed drills with full dosing:
 Required sowing rate
(kg/ha or K/m2)
 Planned later
working speed (km/h)
 Fill cells of dosing wheels before
calibration test
 Seed quantity (kg)
collected from the calibration test
Setup menu Machine data menu
Entry:
 Diagnosis input
 Diagnosis output
 Enter simulated speed
 Select basic data
-
Select machine type
- Working width
- Configure tramline
system
- Configure seed rate
setting
- Pre-emergence mar-
ker
- Track marker sensor
- Level sensor
- Blower fan alarm
- Sowing shaft sensor
- Alarm delay time
sowing shaft/dosing
unit
- Alarm delay time
tramline system
- Alarm delay time
lay shaft (cam
wheel seed drill)
- Running time, pre-
dosing unit (only
for full dosing)
- Tool I, II, III
- Turning on roller
- Hopper
- Working position
sensor
- Track markers
 Display settings
- Set national lan-
guage
Entry
:
 Tramline control
 Interval spacing
 Increased/reduced seed quantity
(%)
 Calibration value (Imp./100 m)
 Blower fan speed
 Fill level
 Fill machine
 Fill level alarm
 Seed rate reduction for tramline
 Control factor