Amazone Amatron+ User Manual

Commissioning
Amatron+ BAG0082.2 10.10 17
5 Commissioning
5.1 Start screen
After the AMATRON
+
is switched on with
machine computer connected, the start menu
(Fig. 15) und zeigt die Terminal – Softwarever-
sion
s- Nr. an.
appears and indicates the terminal software ver-
sion number.
After approx. 2 seconds the AMATRON
+
automatically goes to the main menu.
If after the AMATRON
+
is switched on data
are loaded from the machine computer, e.g. in
event of
 use of a new machine computer
 use of a new AMATRON
+
terminal
 after RESET of the AMATRON
+
termi-
nal
this is indicated on the start screen (Fig. 15).
Fig. 15
5.2 Main menu
Job menu: Entry of data for a job. Be-
fore commencement of sowing, start
the job (see on page 24).
Seed drill calibration menu: Carry out
calibration test before starting sowing
(see on page 26).
On the Caye
na with divided hopper,
there are two function fields for sepa-
rate calibration.
Machine data menu: Entry of machine-
specific or individual data (see on page
18).
Setup menu: Entry and readout of data
for customer service in event of main-
tenance or fault (see on page 29).
Fig. 16

Amazone Amatron+ Specifications

General

Brand	Amazone
Model	Amatron+
Category	Farm Equipment
Language	English