Amazone Amatron+ - Cayena Operation Procedures

Use on the field
50 Amatron+ BAG0082.2 10.10
6.6 Cayena
6.6.1 Procedure for use
1.
Switch on the AMATRON
+
.
2. Select the desired job in the main menu and check the settings
3.
Start the job
4.
Select the work menu.
4 tractor control units are available to operate the hydraulic
functions:
 Operate tractor control unit 1 (hose marking yellow):
 Lower the machine
 Operate tractor control unit 2 (hose marking green):
 Fold the machine extension arm
 Move the track marker to the operational position
 Operate tractor control unit 3 (hose marking blue)
 Tine coulter working depth
 Operate tractor control unit 4 (hose marking red):
 Switch the blower fan on/off.
5. Check the displayed tramline counter for the first field run and
correct as necessary.
6. Start the sowing.
When travel in operational position begins, the dosing starts.

Start predosing.
7. After approx. 30 m, stop and check:
 depositing depth of the seed
 working intensity of the exact harrow
 During the sowing, the AMATRON
+
shows the work menu.
From here, all functions relevant to the sowing procedure can be
actuated.
 The data determined are stored for the started job.
After use:
1. Check the job data (if required).
2. Activate the control units as required.
3.
Switch off the AMATRON
+
.