Amazone Amatron+ - Distance Sensor Failure

Malfunction
56 Amatron+ BAG0082.2 10.10
8.2 Failure of the distance sensor
In event of failure of the distance sensor (Imp./100m), work can con-
tinue after entry of a simulated working speed.
In order to avoid sowing errors, the defective sensor must be re-
placed.
If a new sensor is not immediately available, the work can be contin-
ued as follows:
 Disconnect the signal cable of the defective distance sensor
from the job computer.
In event of failure of the distance sensor, with the machine moving
the seed rows in operational position are not indicated in the work
menu.
1.
Actuate from the main menu.
2.
Enter a simulated speed.
 During the work, the simulated
speed entered must be main-
tained.
Fig. 63