What to do if the left limiter sensor failed on Amazone AmaSpread 2 Farm Equipment?
If the left limiter sensor fails on your Amazone Farm Equipment, it means the signal from the path measurement system of the linear drive for the left limiter is less than 0.5 V. To resolve this, check the cable to the linear drive for any damage or interruptions. If the cable is fine, you may need to replace the defective linear drive (EA460).
What to do if the right limiter sensor failed on Amazone AmaSpread 2?
If the right limiter sensor fails on your Amazone Farm Equipment, it indicates that the signal from the path measurement system of the linear drive for the right limiter is less than 0.5 V. First, check for any damage or interruptions in the cable to the linear drive. If the cable is not the issue, consider replacing the defective linear drive (EA460).
What to do if the left shutter is not completely closed on Amazone AmaSpread 2 Farm Equipment?
If the left shutter is not completely closed on your Amazone Farm Equipment, ensure that you manually close the left shutter.
General| Brand | Amazone |
|---|---|
| Model | AmaSpread 2 |
| Category | Farm Equipment |
| Language | English |
To Next Page