Amazone AmaSpread 2 - Filling the Hopper

Filling the hopper
9
1. Call up the "Hopper" menu.
2. Select "Filling".
3. Enter the "Target fill level".
4. Fill the implement until the target fill level has
been reached.
NOTE
If the work lights are installed, the spread fan
illumination indicates the current target fill level
during the filling procedure.
Light Status of the target fill level
Flashing slowly
Starting at 500 kg before reaching
the target fill level
Flashing faster
Starting at 100 kg before reaching
the target fill level
Continuously lit
When the target fill level is
reached
CMS-I-00006090
CMS-T-00008267-B.1
9 | Filling the hopper
MG7387-EN-II | B.1 | 12.01.2022
28