Amazone AmaSpread 2 - Emptying the Hopper

Emptying the hopper
12
1. Remove the spreading discs.
2. Call up the "Hopper" menu.
3. Select "Emptying".
4. , Open the shutter.
5. Switch on spreading disc drive if necessary.
The agitator movement supports the emptying
process.
6. , Close the shutter after emptying.
7. Switch off the spreading disc drive.
8. The current hopper content will be shown.
CMS-I-00006193
CMS-T-00008276-A.1
12 | Emptying the hopper
MG7387-EN-II | B.1 | 12.01.2022
37