Amazone AmaSpread 2 - Boundary Spreading

11.6 Boundary spreading
The boundary spreading method can be selected
before beginning operation or can be switched on and
off during operation.
The boundary spreading can be adjusted via the tilt
adjustment of the boundary spread deflector.
The selected boundary spreading method is shown
with the LED light.
Normal spreading, no boundary spreading method
selected.
1.48
4794
kg
0
1/min
CMS-I-00006186
"Border spreading" is selected.
The tilt angle of the boundary spread deflector is
shown.
1.48
4794
kg
0
1/min
32
CMS-I-00006185
"Boundary spreading" is selected.
The tilt angle of the boundary spread deflector is
shown.
1.48
4794
kg
0
1/min
80
CMS-I-00006184
"Ditch spreading" is selected.
The tilt angle of the boundary spread deflector is
shown.
1.48
4794
kg
0
1/min
97
CMS-I-00006183
CMS-T-00008259-B.1
11 | Working
Boundary spreading
MG7387-EN-II | B.1 | 12.01.2022
35