Intended use
3
The control computer is used to control
agricultural implements.
The operating manual is part of the control
computer. The control computer is solely intended
for use in compliance with this operating manual.
Uses of the control computer that are not
described in this operating manual can lead to
serious personal injuries or even death and to
implement and material damage.
Uses other than those specified under the
intended use are considered as improper. The
manufacturer is not liable for any damage
resulting from improper use, solely the operator is
responsible.
CMS-T-00005429-B.1
MG7387-EN-II | B.1 | 12.01.2022
8