Amazone AmaSpread 2 - Adjusting the Implement; Configuring the Source for the Speed Signal; Configuring the Speed Signal from the Tractor

Adjusting the implement
7
7.1 Configuring the source for the speed signal
7.1.1 Configuring the speed signal from the tractor
1. Call up "Implement" menu.
2. Select "Terminal".
IMPLEMENT
Speed
Low level and rate control
Terminal
CMS-I-00006087
3. To be able to select the "Signal socket" as the
speed source in the settings,
call up "Speed".
TERMINAL
Speed
CMS-I-00006333
4. Confirm "Terminal speed signal" with .
Speed
Speed signal
Terminal
CMS-I-00006334
CMS-T-00008277-B.1
CMS-T-00008860-B.1
CMS-T-00008864-B.1
7 | Adjusting the implement
MG7387-EN-II | B.1 | 12.01.2022
20