Safety and responsibility
2
2.1 Road traffic
Do not use the control computer or control
terminal during road travel
If the driver is distracted, it can result in accidents
and injuries or even death.
Do not operate the control computer or
control terminal during road travel.
2.2 Maintenance and storage
A short circuit can cause damage
When repair work is performed on the tractor or
on a towed or mounted implement, there is a risk
of short circuit.
Before you perform repair work,
disconnect all connections between the
control terminal or control computer and the
tractor.
Overvoltage can cause damage
If welding work is performed on the tractor or
on a towed or mounted implement, the control
computer or control terminal can be damaged by
overvoltage.
Before welding,
disconnect all connections between the
control terminal or control computer and the
tractor.
CMS-T-00004961-B.1
CMS-T-00003620-C.1
CMS-T-00003621-D.1
2 | Safety and responsibility
MG7387-EN-II | B.1 | 12.01.2022
5
To Next Page
Loading...
Need help?
General
