Amazone AmaSpread 2 - Spreading on One Side; Adjusting the Spread Rate

11. Save the calibration factor
or
Cancel.
12. To optimise the calibration factor,
repeat the calibration run.
CMS-I-00006218
11.3 Spreading on one side
1
Left shutter open
2
Right shutter open
ON
ON
2
1
CMS-I-00006182
Open and close the left shutter
or
Open and close the right shutter.
11.4 Adjusting the spread rate
The setpoint for the spread rate can be increased or
reduced before or during operation.
Increase the spread rate on both sides by
the rate increment.
Reduce the spread rate on both sides by
the rate increment.
Change the spread rate on both sides to
100 %.
120
kg/ha
ON
%
90
CMS-I-00006221
CMS-T-00008258-A.1
CMS-T-00008260-A.1
11 | Working
Spreading on one side
MG7387-EN-II | B.1 | 12.01.2022
33