Amazone AmaSpread 2 User Manual

9. Enter the "Spreading disc nominal speed" from
the setting chart.
10. Enter the "Spreading vane position" from the
setting chart for the long and short spreading
vane.
11. Enter the installed spreading discs under
"Spreading disc".
SPREADER UNIT
Spreading disc nominal
speed
Spreading vane position
Spreading disc
CMS-I-00006129
12. Under "Border spreading", enter the "Nominal
speed" on the boundary side, the "Rate
reduction" and "Limiter height" for border
spreading.
13. Under "Boundary spreading", enter the "Nominal
speed" on the boundary side, the "Rate
reduction" and "Limiter height" for boundary
spreading.
14. Under "Ditch spreading", enter the "Nominal
speed" on the boundary side, the "Rate
reduction" and "Limiter height" for ditch
spreading.
FERT.
Border spreading
Boundary spreading
Ditch spreading
Fertiliser
CMS-I-00006131
15. Under "Spreading material", select "Fertiliser" or
"Special spreading material".
FERT.
Spreading material
Determine calibration
factor
Fertiliser
Fertiliser
CMS-I-00006130
8 | Managing products
Entering the product data
MG7387-EN-II | B.1 | 12.01.2022
27

Amazone AmaSpread 2 Specifications

General

Brand	Amazone
Model	AmaSpread 2
Category	Farm Equipment
Language	English