Need help?Do you have a question about the Amazone AmaTron 4 and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | AmaTron 4 |
| Category | Touch terminals |
| Language | English |
Explains the importance and purpose of the operating manual and its safety-related information.
Explains the use of symbols, warnings, and signal words like DANGER, WARNING, and CAUTION.
Lists other documents relevant to the operation of the AmaTron 4, found in the appendix.
Provides contact information for submitting suggestions and feedback for manual improvements.
Details the components and buttons visible on the front of the AmaTron 4 terminal.
Shows and lists the various ports and connectors available on the rear of the AmaTron 4.
Describes the main screen layout, status bar, and active implement/tractor display.
Explains how to navigate and select applications using the carousel interface.
Provides an overview of the map display elements and controls.
Explains the function and display of the Universal Terminal for implement control.
Instructions for powering the AmaTron 4 terminal on and off using the designated button.
Methods for navigating and switching between different applications on the AmaTron 4.
How to customize the information displayed in the status bar.
Accessing frequently used functions via the quick-start menu.
How to input numbers and perform calculations using the numeric keypad.
Instructions for entering text using the on-screen keyboard.
How to enable or disable the dynamic button bar feature for automatic hiding.
Settings for using and mirroring the camera image, including reverse driving detection.
How to link AmaTron 4 power control to the tractor's ignition switch.
Procedures for configuring the date, time, and time zone settings.
How to adjust language, decimal separator, and units of measurement.
Instructions for changing the audio volume level on the AmaTron 4.
How to adjust the screen brightness using a slider.
Enabling visual feedback (white circle) when the touchscreen is activated.
How to configure applications for navigation using swipe gestures.
Guides on configuring the A100/A101 GPS receiver for automatic satellite search.
Explains configuration options for the Ag-Star GPS receiver based on satellite systems.
How to restore the GPS receiver to its default factory configuration.
How to set up and model ISOBUS implements for correct map display.
Steps for creating and configuring non-ISOBUS implements, including geometry.
How to change the name of an existing implement.
Steps for removing an implement from the system.
How to select implements for correct data loading.
Guide on adding new tractor profiles to the system.
How to adjust tractor geometry for accurate map display and control.
Setting up various tractor sensors like wheel, radar, GPS, and PTO shaft.
How to select and display specific implement functions on the button bar.
How to show or hide implement details on the map view.
Using gesture controls to zoom in and out on the map.
Activating a zoomed-out view showing the entire field.
Centering the map view on the vehicle's current position.
Explains GPS drift and how to correct it in the map view.
How to enable warnings for proximity to field boundaries or obstacles.
Ensuring correct tractor orientation display, especially in reverse.
How to auto-create a safety zone within a field boundary.
Setting up automatic map zooming based on events like speed or proximity.
How to choose which map layers (e.g., coordinate network) are displayed.
How to create a new field when not using documentation features.
Steps to create a new field and automatically save associated data.
How to import job data files in ISO-XML format.
Steps to load field data from imported ISO-XML files.
How to import field data from shape files.
How to create a new job and assign it to a field.
How to manage product data, including creating and assigning them to jobs.
How to manage customer data and assign it to jobs.
How to manage driver data and assign it to jobs.
How to export recorded job data in ISO-XML format.
How to configure overlap settings for part-width section control.
How to start recording worked areas and track lines.
How to stop the recording process.
How to create a field boundary by working the field edge.
How to rename or delete existing field boundaries.
How to create headlands by defining their width and track lines.
How to rename, delete, or open settings for headlands.
How to set up parallel driving, including light bar sensitivity.
How to choose between A-B lines and smoothed contours for track lines.
Steps for creating A-B lines and smoothed contours.
How to highlight track lines to create beds of specific working widths.
How the light bar indicates vehicle deviation from the track line.
How to assign functions to buttons on AUX-N input devices.
Confirming, changing, or deleting AUX-N assignments.
To Next Page
