Amazone AmaTron 4 User Manual

Using the Universal Terminal
X
The implement controls are shown on the Universal
Terminal. The implement can be operated using the
Universal Terminal. It is possible to toggle between the
implement controls of the connected implements.
The keys for the implement controls can be directly
actuated by touch or using the buttons on the right side
of the AmaTron 4. The arrangement of the buttons
corresponds to the representation of the keys on the
user interface.
1. To open the Universal Terminal,
Press the button for the Universal Terminal
1
.
2. To select the implement controls to be toggled,
press and hold the button for the Universal Terminal
1
.
1
A list with the connected implements is opened.
3. Select the desired implement.
The selected implements are marked with a
checkmark.
4. To toggle between the implement controls for the
selected implements,
press the button for the Universal Terminal
1
.
CMS-T-00000475-B.1
X | Using the Universal Terminal |
MG6010-EN-GB | G.1 | 13.12.2018
103

Amazone AmaTron 4 Specifications

General

Brand	Amazone
Model	AmaTron 4
Category	Touch terminals
Language	English