Amazone AmaTron 4 - Configuring AUX-N Input Devices; Setting Up AUX-N Input Devices

Using automatic boom lowering
V
The automatic boom lowering automatically lowers the
boom when the sprayer moves onto an unworked area.
NOTE
The value to be entered refers to the time at which the
AmaTron 4 lowers the boom before the unworked
area is reached.
The value for the time of the lowering procedure must
be determined manually.
The correct timing of the automatic boom
lowering function depends on the following
factors:
Forward speed
Tractor equipment
Implement equipment
Lifting distance of the boom
REQUIREMENTS
For AMAZONE ISOBUS sprayers:
The sprayer is connected
Field boundary has been created, see page 82
CMS-T-00000284-C.1
V | Using automatic boom lowering |
MG6010-EN-GB | G.1 | 13.12.2018
94