Amazone Amatron+ - Terminal Setup

Commissioning
Amatron+ BAG0082.2 10.10 35
5.6.1 Terminal setup
In the setup menu:
 In order to change the display settings,
actuate the following keys simultaneously:

Scroll and

Shift key.
 Via the function field
call up the entry
"Display settings".

Display the units located on the bus.
Fig. 42
Page 1
of Terminal setup
 Set the contrast via the function fields
or. .
 Set the brightness via the function fields
bzw. einstellen.
 Invert the display black
white .

Key for sound on/off
 Delete the stored data via the function field
. (See on page 34).
 Set the language of the user interface via
the function field
.

Exit Terminal setup menu..
The Terminal reset function resets all
data of the terminal to the factory set-
tings. No machine data are lost.
Fig. 43
Fig. 44