Commissioning
34 Amatron+ BAG0082.2 10.10
Page 6 Basic data (Fig. 40):
Switching point working position
sensor
Default values:
Cirrus Activ = 80bar
Cayena = 40bar
Type of track marker
Manual change
Control via shuttle valve and sensor -
Display in work menu of which track
marker is to be used next.
Automatic change
of control block, hydraulic preselection
of track marker possible.
None
No track marker or track marker with-
out sensor fitted.
Dosing unit transition period
Delay between Tank 2 empty and
Tank 1 start.
Fig. 40
Page 2 of the setup menu (Fig. 41):
Reset machine data to factory set-
tings. All entered and accumulated data,
e.g. jobs, calibration values and setup data
are lost.
Fig. 41
To Next Page
Loading...
