General safety instructions
2.16.4 Cleaning, maintenance and repairs
• Repair-, maintenance- and cleaning operations as well as the
remedy of function faults should principally be conducted with
ο the drive is switched off
ο the tractor engine is at a standstill
ο the ignition key has been removed
ο the connector to the machine has been disconnected from
the on-board computer
• Regularly check the nuts and bolts for a firm seat and retighten
them as necessary.
• Before carrying out any maintenance-, repair- and cleaning work
ensure the lifted implement or lifted implement parts against un-
intended lowering.
• When replacing work tools with blades, use suitable tools and
gloves.
• Dispose of oils, greases and filters in the appropriate way.
• Disconnect the cable to the tractor generator and battery, before
carrying out electrical welding work on the tractor and on at-
tached machines.
• Spare parts must meet at least the specified technical require-
ments of AMAZONEN-WERKE! This is ensured through the use
of AMAZONE original spare parts!
26
Cenius 03 BAG0144.5 10.19
To Next Page
Loading...
