3 Loading and unloading
WARNING
Risk of crushing due to accidental falling of a machine attached
to a load carrier during loading and unloading!
• Use only slings (ropes, belts, chains, etc.) with a minimum ten-
sile strength greater than the total weight of the machine (see
Technical data).
• Only attach your lifting gear to/at the designated points.
• Never remain in or enter the area below a raised, unsecured
load.
CAUTION
The minimum tensile strength per sling must be 2000 kg!
The machine has 3 attachment points for lifting eq
uipment!
Cenius 03 BAG0144.5 10.19
27
To Next Page
Loading...
