Amazone Cenius 3003 - Coulter Replacement; Coulter Replacement C-MIX-Clip; Installing and Removing the Disc Segments (Workshop Work)

Cleaning, maintenance and repairs
12.4.2 Coulter replacement
When changing coulters, comply with the follow-
ing:
• Screw tightening torque: 145 Nm
• after 5 hours of use, check the bolt connec-
tion for tight fit.
12.4.3 Coulter replacement C-Mix-Clip
Change the coulters using assembly iron
78708809 and a hammer.
12.5 Installing and removing the disc segments (workshop work)
• Pay attention to the preload when
removing spring-loaded elements
(disc segments)! Use suitable de-
vices!
• In addition, use longer bolts as
aids when removing and installing
the disc segments!
72
Cenius 03 BAG0144.5 10.19