Coupling and uncoupling the machine
7.2 Uncoupling the machine
When uncoupling the machine, there must always be enough space
in front of the machine, so that you can align the tractor with the ma-
chine if necessary.
1. Park the implement on boards to protect the tines.
2. Always inspect the machine for obvious signs of damage during
uncoupling. Observe here the chapter "Obligations of the user",
page 8.
3. Uncouple the machine from the tractor as follows:
3.1 Relieve the top links.
3.2 Unlock and uncouple the upper link hooks from the tractor
seat.
3.3 Relieve the lower links.
3.4 Unlock and uncouple the lower link hooks from the tractor
seat.
3.5 Drive the tractor approx. 25 cm forwards.
→
This will allow more room between tra
give better access for uncoupling the supply lines.
3.6 Secure the tractor against unintentional starting and rolling
away, see chapter "Securing the tractor against uninten-
tional starting and rolling away", from page 55.
3.7 Disconnect the hydraulic hoses, see chapter "Disconnect-
ing hydraulic hoses" from page 48.
3.8 Disconnect the light system.
Cenius 03 BAG0144.5 10.19
59
To Next Page
Loading...
