Amazone Cenius 3003 - 12 Cleaning, Maintenance and Repairs

Cleaning, maintenance and repairs
12 Cleaning, maintenance and repairs
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
through
•
unintentional falling of the machine raised using the trac-
tor's three-point hydraulic system.
•
unintentional falling of raised, unsecured machine parts.
•
unintentional start-up and rolling of the tractor-machine
combination.
Secure the tractor and machine against unintentional starting and
unintentional rolling away before you perform any cleaning, servicing
or maintenance work on the machine. See page 55.
DANGER!
•
During cleaning, maintenance and repair work, observe
chapter "Safety instructions for the user" from page Seite
26,
•
Always use suitable supports when carrying out mainte-
nance work on the raised machine.
•
Check the proper function of the light system!
• After repair work involving repainting, the product logos and in-
struction signs must be replaced!
• Worn and damaged parts must be replaced. Use only OEM
spare parts!
• All marked lubrication points must be lubrication accordin
g to the
lubrication plan (page 69) and the sliding and pivot points
greased accordingly!
• Clean the tools after work!
Cenius 03 BAG0144.5 10.19
67